CAT-H Series Power Take-Off
Description
The CAT-H Series Rear-Mounted Power Take-Off (PTO), available for the entire line of Caterpillar® CX Series transmissions, was the best way to eliminate frame clearance issues commonly faced with the use of a side-mounted PTO. Chelsea's easy-to-install, PowerShift (hydraulic) CAT-H Series ran at 125% of engine speed and offered multiple output options, including SAE “B”, DIN, and 1410 series driveshaft for all application needs. With advancements such as O-Ring seals on mounting surfaces and our Wet Spline output option, this PTO was built for dependability that is synonymous with CAT. This PTO is no longer available.
Markets:
• Oil & Gas
• Mobile
• On Highway
• Other Mobile
Features/Benefits:
• Direct Drive (patent # 7,510,064 B2) PowerShift PTO for Caterpillar®
• Five Output Options “XD” Output Standard
• Wet Spline Output Available which Increases Spline Life by a Factor of 10
• Continuous Torque Rating 335 Lbs-ft
• Two Year Warranty
Applications:
• Walking Floors
• Bulk Transporters
• Dump Truck
• Concrete Trucks
Specifications
| Manufacturer | Parker |
| Model | H Series Power Take-Off |
| Condition | New |
| Intermittent Torque | 301 to 400 lb-ft, 401 to 500 Nm, 375 lb-ft (Check Application Pages for Actual Torque Ratings), 454 Nm (Check Application Pages for Actual Torque Ratings) |
| Continuous Operation | Yes |
| Shift Type | Hydraulic, PowerShift (Hydraulic) |
| Output Power | 56+ HP, 41 to 50 kW |
| Transmission Manufacturer | Other |
| Output Type | SAE B Pump Flange, ISO 7653 Pump Flange, Driveline |
| Lubricant | X = No Pressure Lube, W = Wet Spline |
| Mounting Type | Rear Mount |
| Output Shaft Type | Round Shaft (1-1/4" - 5/16" Key), SAE B (7/8" - 13T) Pump Spline, SAE BB (1" - 15T) Pump Spline, SAE C (1-1/4" - 14T) Pump Spline, DIN 546 |
| Shaft Power | 32 HP (500 RPM), 64 HP (1000 RPM), 24 kW (500 RPM), 48 kW (1000 RPM) |
| Weight | 42.5 lb, 19.3 kg |